Hi,
I am trying to boot my BB C3 with latest unstable Angstrom and it
hangs up very early (please see console output below). Just as info,
here are my binaries:
Angstrom-custom-image-glibc-ipk-2010.4-test-20100428-beagleboard.rootfs.tar.bz2
MLO (from http://www.angstrom-distribution.org/demo/beagleboard/)
u-boot-beagleboard-2010.03-rc1+r47+gitr946351081bd14e8bf5816fc38b82e004a0e6b4fe-r47.bin
uImage-2.6.32-r71+gitr7b8926aa626991fa087b00f6bbc1fb6b0e8269b0-beagleboard.bin
Also, I have to mention that there is also Trainer board connected.
Is it a known issue? If not, I would appreciate some help or hints how
to debug in such a situation because now I have no idea how to proceed
and what can I try except of downgrading back to stable.
Thank you,
Andrey.
Texas Instruments X-Loader 1.4.4ss (Apr 13 2010 - 22:36:28)
Beagle Rev C1/C2/C3
Reading boot sector
Loading u-boot.bin from mmc
U-Boot 2010.03-rc1 (Apr 28 2010 - 11:12:19)
OMAP3530-GP ES3.0, CPU-OPP2, L3-165MHz, Max clock-600Mhz
OMAP3 Beagle board + LPDDR/NAND
I2C: ready
DRAM: 256 MB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Probing for expansion boards, if none are connected you'll see a
harmless I2C error.
Recognized Tincantools Zippy2 expansion board (rev 1 )
Beagle Rev C1/C2/C3
Die ID #5ac400030000000004013f8901001001
Hit any key to stop autoboot: 0
mmc1 is available
reading uImage
3188292 bytes read
## Booting kernel from Legacy Image at 80200000 ...
Image Name: Angstrom/2.6.32/beagleboard
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3188228 Bytes = 3 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux.........................................................................................................................