BeagleboardXM Ethernet RJ45 part number

GoogleGroups
1

Hi Gerald,

We have been looking at the BeagleboardXM BOM spreadsheet but don't
see a manufacturer part number (or supplier part no.) for P15 Ethernet
connector. We need this in order to build a footprint, for the part,
do you have a part number and manufacturer we can use?

Also we are adding an optional external NAND chip, the Craneboard uses
a 3.3V part, we need a 1.8V part, do you know offhand what part might
be suitable?

Thanks

John

2

On the NAND, you can check Micron. They should have a 1.8V part. Look at the data sheet for the Micron part we use on the BeagleBoard C4 and pull out the NAND device that is in it and then look for that devcie and the packages it uses.

As the RJ45, we use a multiple footprint design that supports the following parts:

Bel Fuse | 0817-1A1T-11-F |

  • | - |
    Pulse | J0026D01BNL |
    Bothhand | LU1S041-43 |

Gerald

3

Thanks Gerald!

John

4

My pleasure!

Gerald