DSI on Beagle Board

GoogleGroups
1

Hi All,

Has anyone proved DSI on Beagle board, if so please let me know the
source/patch for reference.

With Regards
Srinath

Please do not print this email unless it is absolutely necessary. Spread environmental awareness.

-------------------------------------------------------DISCLAIMER------------------------------------------------------
The information transmitted herewith is confidential and proprietary information intended only for use by the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer.

2

DSI has not been tried on the Beagle as the signals are not accessible
on Beagle.

Gerald

3

Gerald,

4

Are the DSI lanes available on the OMAP 3530? I thought that feature wasn't
available on the 35xx series. I've been looking at a SN75LVDS84A for LCD
SerDes to Toshiba LCD panels.
  Jack Peacock

5

No it will not.

Gerald

6

It is not officially supported on the OMAP3530 and is not in any of the documentation,. It may be supported on a case by case bases for largeer customers. It will not be supported on Beagle because the TFP410 is on the same signals and the termination resistors are not provided.

Gerald