Hi,
I am using the Beagleboard revision B5 and the
2.6_kernel_revb-v2.tar.gz kernel.
The HID options for the USB is enabled in the kernel.
But when i connect the USB mouse/keyboard to the OTG port,
there is no device connected notification.
Am i missing something ?
In rev B5 only OTG connector is present and USB Host is not mounted.
Regards,
Robin
Are you using the right cable (mini-a)?
I am using the below adapter type and connecting the USB Mouse/
Keyboard.
USB Female A to USB Mini B Adapter
http://www.darkwire.com.au/html/usb_cable_adapters.html
Regards,
Robin
Wrong cable: you should use a mini-A adapter, not a mini-B!
Cheers
Pietro
There is lots of useful information on USB OTG at:
BeagleBoard wiki: http://www.elinux.org/BeagleBoard#OTG
BeagleBoard community FAQ: http://www.elinux.org/BeagleBoardFAQ#USB_OTG_connection_.231
Hope this helps,
John