Hi,
I want to recover my devkit board.
currently the x-loader i have in the board is not taking boot from MMC mode.
also, in addtition to this,
i am getting error messages like this,
U-Boot 1.3.3-svn239 (Sep 18 2009 - 18:01:10)
OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
OMAP3 DevKit8000 Board + LPDDR/NAND
DRAM: 128 MB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_pin: I2C_STAT=1000
I2C read: I/O error
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_pin: I2C_STAT=1000
I2C read: I/O error
Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x280000, size 0x200000
Reading data from 0x47f800 – 100% complete.
2097152 bytes read: OK
Booting kernel from Legacy Image at 80300000 …
Image Name: Linux-2.6.28-rc9-omap1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2276456 Bytes = 2.2 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum … Bad Data CRC
ERROR: can’t get kernel image!
OMAP3 DevKit8000 # mmcinit
Unknown command ‘mmcinit’ - try ‘help’
Guys, can anybody help me to proceed on this,