Is there a CVBS to BT656 Adapter board for Beagle-xm?

GoogleGroups
#1

Something that may contain something like a TVP5150 that can connect
to the Beagle-xm.

#2

Ok - research from our group reveals the following hardware, but there
is an additional question of
whether there are any video input drivers for 3730 for Linux, WinCE on
Beagle or even the Mistral EVM?

CVBS input board

http://shop.leopardimaging.com/product.sc;jsessionid=31E16CEF25CFF61449F7B650E2A6CC59.qscstrfrnt02?productId=47&categoryId=10

schematic

https://www.leopardimaging.com/uploads/li_vi365_v1.0.pdf

Flex cable

http://shop.leopardimaging.com/product.sc;jsessionid=31E16CEF25CFF61449F7B650E2A6CC59.qscstrfrnt02?productId=32&categoryId=10

#3

These board have not been verified with the -xM. So work will need to be done to make them work, assuming that they can work.

Gerald

#4

Looking at the schematic, this board will not work on the -xM.

Gerald

#5

J Gardner wrote:

Ok - research from our group reveals the following hardware, but there
is an additional question of
whether there are any video input drivers for 3730 for Linux, WinCE on
Beagle or even the Mistral EVM?

Some TVPxxx drivers exist in the linux kernel. "Glue" code for the OMAP3 CCDC port
should also exist. but a straightforward driver for this board might need to
be tweaked/written.