MLO & u-boot.bin given on http://elinux.org/BeagleBoard_Zippy site are not working

GoogleGroups
1

Hi all,

I am using the boot images ( MLO, u-boot.bin & uImage ) provided on
following site http://elinux.org/BeagleBoard_Zippy to boot my
BeagleBoard-Zippy combo board. But am unable to boot with these
images. The screen shows blank on booting. If anyone could throw some
light on this issue, I will be really greatful.

Thanks in Advance,

Ashwini

2

Have you tried using the angstrom ones? Angstrom has had support for the zippy for a long, long time

3

Hi all,

I am using the boot images ( MLO, u-boot.bin & uImage ) provided on
following site http://elinux.org/BeagleBoard_Zippy to boot my
BeagleBoard-Zippy combo board. But am unable to boot with these
images. The screen shows blank on booting. If anyone could throw some
light on this issue, I will be really greatful.

What BeagleBoard revision are you using? The MLO, u-boot.bin and uImage on the elinux.org page should work with a Rev.C Beagle. I’m not sure if anyone has tried it with other versions. Also, feel free to update the page with your results :slight_smile: