Need drivers for BeagleBoard XM

can any one tell me from where i must get the divers for beagle-board XM.
Is driver for bone and XM are same? If yes then its not detecting my board what’s the issue ?

I dont have an XM but . . .

3.14.39-ti-r61 3.8.13-bone70 4.1.0-rc1-x0-dirty
debian@xanbustester:~$ ls /boot/dtbs/3.8.13-bone70/
am335x-bone.dtb omap2420-h4.dtb omap4-panda-es.dtb
am335x-boneblack.dtb omap3-beagle-xm.dtb omap4-panda.dtb
am335x-evm.dtb omap3-beagle.dtb omap4-sdp.dtb
am335x-evmsk.dtb omap3-evm.dtb omap4-var-som.dtb
am335x-tester.dtb omap3-tobi.dtb omap5-evm.dtb
arduino-tre.dtb omap4-panda-a4.dtb

Would be my guess is currently down.. so here's a direct link:

It's the same base image we use for the bone's... but setup for teh xm..


Also, I’m not sure if uboot is generic enough to detect both beagleboards, and beaglebones on the same image. If not . . . you may have to recompile uboot using these instructions:

Or simplest, do what Robert says :wink:

Firstly thanks for replying
but guys i did those things and m sorry neither my PC nor my friends PC nor my colleges PC is detecting the board.

Though i loaded OS on Sd card and its giving me proper display, I loaded angstrom in it.