Need Latest eMMC flasher image of Beaglebone black REV C

HI I tried Flashing the onboard eMMC with the latest image but as soon as i insert the SD card with the possible eMMC flasher image after few seconds the USER leds start blinking in a continuous pattern seems to be dancing. I suspected the corruption of the image then i reflashed it with the another and another image but none worked. i hope a latest and stable eMMC flasher image should work.

the board works normally when a SD card image is flashed.

This dancing, or led chasing, or cyclon pattern is the flasher, flashing the eMMC…

It’ll either finish in one of two modes… It’ll shutdowrn, proper flash… Or all 4 LED’s will turn on and off forever, showing a failure…

Latest can be grabbed from here: