Hi, All,
I am new for BBB,
BBB use static IP during the ethernet cable is plugged. And then I checked the eth0 interface by ifconfig command, interface eth0 is working, MAC and IP are shown.
After unplugged the ethernet cable for a while, about 30 sec, and plug in again.
LEDs on RJ-45 connector are not ON.
when type “ifconfig” command, MAC is shown, but IP is not shown.
I try to interface down and up the eth0, but IP is not shown.
After reboot, every things is fine.
Anyone who has same experience can give the solution? not reboot…
BR
Paul