Setting Up SD Card

I am trying to run Ununtu using Beagleboard XM. I get the following message when I run the setup_sdcard script:

I see…
fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
Disk /dev/sdc: 3965 MB, 3965190144 bytes

lsblk:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465.8G 0 disk
├─sda1 8:1 0 462G 0 part /
├─sda2 8:2 0 1K 0 part
└─sda5 8:5 0 3.8G 0 part [SWAP]
sdc 8:32 1 3.7G 0 disk
├─sdc1 8:33 1 48M 0 part /media/saurabh/boot
└─sdc2 8:34 1 3.7G 0 part /media/saurabh/rootfs

Are you 100% sure, on selecting [/dev/sdc] (y/n)? y

Debug: image has armv7 multi arch kernel support: v3.11.1-armv7-x14
Debug: image has bone device tree kernel support: v3.8.13-bone28
Debug: image has omap kernel support: v3.7.10-x13
Note: [–dtb omap3-beagle-xm] now replaces [–uboot beagle_xm]

You need internet access to run the "setup_sdcard.sh" script, as the
bootloader is pulled separately to allow me to update it later in the
field.

Regards,

hi Mr Robert Nelson
setting up bb by http://elinux.org/BeagleBoardUbuntu is too slow, it takes about 5 hours after run the “setup_sdcard.sh” script,it is due to the internet speed.

though,l think is there an easy way to boot up BB?more convienient?
THX

"5 hours"??? It's less then 5 minutes for me..

I've already provided everything you need, from images to including
step by step guides...

So what would you like me to do for you?

Regards,