TI USB100v2 JTAG Emulator for External NAND flash programming

GoogleGroups
1

Hi,

I would like to experiment External NAND flash interface with BeagleBone Black.

And for that I need to finalize a programmer to flash the External NAND flash connected to the beagle bone black.

So is it possible to program External NAND Flash connecting to Beagle Bone Black with TI USB100v2 JTAG Emulator and Uniflash Standalone Flash Tool for TI Microcontrollers.

I would like to confirm it before ordering the Emulator.

Anybody have any practical idea about it, please let me know.

Thanks in Advance,

Jayakrishnan K V

2

External NAND is a eMMC device. Same as a microSD. You have to use thoseprotocols to program it. JTAG does not offer any additional capabilities in that respect.

Gerald

3

Thanks Gerald for the quick response.

But I need to connect NAND flash like Micron MT29F8G08ABABAWP to the Beagle bone black through the expansion connector and boot from it.

So is it possible to program like that NAND flash connected to beagle bone black through TI USB100v2 JTAG Emulator and Uniflash Standalone Flash Tool.

Thanks,
Jayakrishnan K V

4

Yes.

Gerald

5

Ok.

Thanks,
Jayakrishnan K V