[U-Boot] [PATCH 11/11] beagle_x15: add board support for Beagle x15

GoogleGroups
1

This is the bare minimum support for Beagle x15
into u-boot. There is still quite some work in
order to get this in good shape, but it's a
start.

Sorry, I should have commented earlier :slight_smile:

we could expand this a little more here?
How about:
    BeagleBoard-X15 is the next generation Open Source Hardware
    BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHZ A15
    processor. The platform features 2GB DDR3L (w/dual 32bit busses),
    eSATA, 3 USB3.0 ports, integrated HDMI (1920x108@60), separate LCD
    port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
    Ethernet.

    For more information, refer to:
http://www.elinux.org/Beagleboard:BeagleBoard-X15

ofcourse - the wiki is yet to be built up..

2

will do, it has been a while since this stopped being "bare minimum"
anyway. It's actually pretty complete from u-boot's point of view.

3

BeagleBoard-X15 is the next generation Open Source
Hardware BeagleBoard based on TI's AM5728 SoC
featuring dual core 1.5GHZ A15 processor. The
platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x108@60),
separate LCD port, video In port, 4GB eMMC, uSD,
Analog audio in/out, dual 1G Ethernet.

For more information, refer to:
Beagleboard:BeagleBoard-X15 - eLinux.org

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---

awesome - looks good to me. Thanks for doing this.