USB keyboard & Mouse Problem.

I am new with Beagleboard.
Porting Angstrom & Ubuntu 10.10 on my BB was kind-off easy for me.
Thanks to Beagle wiki.
After the very FIRST boot I'm getting loggin screen on my HDMI Monitor
& it gets auto-loggin into Angstrom. But USB Key-board & Mouse are not
working, although I can see the optical mouse LED is lit.

BB details :-
TI OMAP3530 Beagleboard Rev. C3 (old one which has only 1 HOST USB)
O.S :- Angstrom-Beagleboard-demo-image-glibc-ipk-2011.1-
Keyboard & Mouse Make :- Microsoft.
Keyboard & Mouse is connected to HOST USB via 1-4 USB HUB.
SD Card :- 1GB & 8GB(for Angstrom & Ubuntu10.10 resp.)
Self-Made Serial to USB converter (which is working fine & getting
everything on Terminal <$screen /dev/ttyUSB0 115200> )

Is there anything I can do from Linux Terminal??

The same problem is with Ubuntu 10.10. :frowning:

Please help me how to ride-off with this problem.
thanks & regards
-Ambarish (Mumbai,India)

Are you using a 5v power supply or USB OTG to power the board? If you
are running off the USB OTG I would suspect a power issue was to