hi list,
i have a new BB Black and got a boot probelm even before i could start
playing with the hardware.
1. The factory image does not enable HDMI or so so i have no output at all
2. I tried to install a new image and wrote the BBB-eMMC-flasher-2013.09.04.img
to a SDcard
2a. i tried to flash, via pressing S2 -> nothing happens
3. BUT The system is booting from SDcard fine
Anyone an idea what is going on ?
re,
wh
The factory image does enable HDMI by default. Sounds like it does not like your monitor.
http://www.elinux.org/Beagleboard:BeagleBoneBlack_HDMI
For flashing questions
http://www.elinux.org/Beagleboard:Updating_The_Software
Gerald
The factory image does enable HDMI by default. Sounds like it does not like
your monitor.
Beagleboard:BeagleBoneBlack HDMI - eLinux.org
For flashing questions
Beagleboard:Updating The Software - eLinux.org
Gerald
I tried every think i could find inkluding access the board via USB
nothing worked except booting from SDcard. For me it seems that the EEProm
is brocken. I guess i will give it back.
note: when i boot from SDcard HDMI and friends work fine
re,
wh