Hello all, I built the uboot for the BeagleV-Ahead ( GitHub - beagleboard/beaglev-ahead-u-boot: Mirror of: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead-u-boot ), put it on an SD card and booted the uboot on the BeagleV-Ahead. However, to do so, I had to press the “SD” button on the board d…

@Kilian @RobertCNelson what happened to the patch from Sipeeed?? is this patch in public domain ??

merged… Commits · beaglev-v2020.01-1.1.2-ubuntu · BeagleV-Ahead / beaglev-ahead-u-boot · GitLab

looks like there is more work to do, i had zero’d emmc, so it looks like the .bin files are being loaded from emmc. U-Boot 2020.01 (Oct 27 2023 - 12:27:40 -0500) CPU: rv64imafdcvsu Model: T-HEAD c910 light DRAM: 4 GiB C910 CPU FREQ: 750MHz AHB2_CPUSYS_HCLK FREQ: 250MHz AHB3_CPUSYS_PCLK FR…

[image] amf99: looks like there is more work to do, or make sure the eMMC has a decent enough version installed… Regards,

Hi I managed to boot of the SD card, the only thing using the emmc partition was the uboot part - some sd cards work and some don’t as was posted above. I can share the details if you’re interested. I had to modify the board/thead/light-c910/light.c mentioned in the patch above as well. NAME …

Hi @m.zakrzewski you can grab the daily build of the 1.1.2 branch here: Artifacts · BeagleV-Ahead / xuantie-ubuntu · GitLab Just edit the the “fastboot*” script like so to only update the eMMC partition: #!/bin/bash if ! id | grep -q root; then echo "./fastboot_emmc.sh must be run as root:" ech…

@RobertCNelson yes I used this repo to build the modified u-boot-with-spl.bin. Ill try if it works with the new kernels and boot/root fs tomorrow with another sd card. I wiped my emmc partition 1 so it looks like using fastboot is limited to uboot in my case anyway

This is the procedure that I used: Note: the modified uboot always expects the sd card to hold the firmware files 1. Clone the repo git clone https://github.com/beagleboard/xuantie-ubuntu cd xuantie-ubuntu 2. Look for the newest CI job’s (e.g. build (#16662) · Jobs · BeagleV-Ahead / xuantie-ub…

@m.zakrzewski I tried to follow your instructions, here’s a few comments [image] m.zakrzewski: Prepare the sd card partitions what is partition #1 size ? “p for main partition”, p prints, not sure what you want partition #2 and 3 need to be formated, mkfs.ext4 run ‘sync’ before ‘umount’…

Hi @amf99 thank you for the remarks, here is the amended procedure, tested with the original yocto, original ubuntu, and the ubuntu console and ubuntu xfce rootfs images: Note: the modified uboot always expects the sd card to hold the firmware files 1. Clone the repo git clone https://github.com…

BeagleBoard

BeagleV-Ahead automatic SD card boot

BeagleV

ahead

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled